Skip to main content

How to reduce the recycle bin size for a particular drive

Reducing the recycle bin size for a particular drive helps improve the computer’s performance and also saves a lot of hard disk space.

To do this right clicks the recycle bin and select properties.

Here you can either configure drives independently or use one setting for all drives.

In either case set it to around 5% by moving the slider.

If you configure drives independently then go to the tab of the drive and then move its slider to configure its setting.

If you use one setting for all drives then modifying the slider in the global tab would be enough.

Now click the apply button.
Labels:

Popular posts from this blog

Automatically align the column widths in Windows Xp

Some times when you browse folders in details view, the view may be cluttered and you might want to resize the column widths manually to get the complete details fit in a single screen in the horizontal direction so that you need not use the horizontal scroll bar to view the details which are off screen. Alternatively, Windows Xp provides an automatic way to adjust column width. Just select any row in the list and press they key combination, “ctrl + ‘+’of the numeric key pad”.
Read more

How to disable all the flash in SeaMonkey using AdBlock plus ( flashblock not working when JavaScript is disabled)

Flash block is a very good add-on for blocking flash in SeaMonkey, but when you disable JavaScript in the browser, the flashblock add-on does not work. So here is an alternative. In SeaMonkey after installing AdBlock plus, do the following to remove flash completely. Open AdBlock plus (Go to tools > AdBlock plus). Now click the filters menu and select ADD FILTERS. Now in the filter rule type *.swf and click the apply button. Here after you will not be able to view flash in your browser. Blocking flash helps save a lot of bandwidth. If you want to see flash in a particular page then you will have to disable AdBlock plus by going to AdBlock plus > options >and uncheck the Enable AdBlock plus menu.
Read more

How to get Ribbon Style Interface in LibreOffice Write and Calc.

The ribbon interface in Microsoft office makes it easy for users to complete tasks easily. You can get a similar interface in LibreOffice by following the steps below: 1. Download the latest version of LibreOffice (at the time of writing this post, the version is 5.4) 2. Open LibreOffice Writer and Go to Tools > Options. 3. Under LibreOffice section, click Advanced. 4. Check the checkbox saying, "Enable Experimental Features". 5. Now go to View > Toolbars > select Notebookbar. 6. After restating, you should get ribbons. 7. You can still access the old layout by clicking on the three slider menu button and selecting MenuBar, to show the old style menu bar as well. If you want to change the tool bar style, you can select View (in the old style Menubar) > Toolbar Layout > Default. You can do the same for LibreOffice Calc as well.
Read more